Preparation And Execution - PMA SINGLE-CUT EVO 5.0 Instrucciones De Uso

EN

2. Preparation and execution

To prevent detachment of the second suction pad,
position the screw as indicated.
Richtig Falsch
Affix vehicle body and paintwork protection.
Adhesive tape, green 38 mm, 50 m roll,
Art. No.: 13501507-1 and 50 mm, 50 m roll,
Art. No.: 13501508-1
Position the protective cover on the inside and press the
wire-feeder with the cord through the adhesive bead.
Caution: It is important that the cord is pushed
through the PU bead at the lowest point in the corner
of the windscreen, otherwise too much force can
build up at the end of the removal process and the
second suction pad can come loose.
12 PMA/TOOLS AG