Brandson Equipment 306234 Manual Del Usuario página 15

TOTAL MODE - The totalamount of water is measured until the counter is reset. Press the
multifunction button to display the total water consumption, maximum 99999 L / 99999 GAL.
Press and hold the button for 3 seconds to reset the total.
Toggling the L & GAL unit - In FLOW MODE, press and hold the multifunction button for 3
seconds to toggle between L/Min and GAL/Min.
Standby - No display (no operation or no water flow for more than 1 minute).
Low battery indicator - Please change the battery when this symbol appears. When replacing
batteries, always ensure that the polarity of the contacts is correct.
Note: If the flow rate exceeds 45.5 L/min or 12.0 GAL/min, the LCD display will show
HHHH.
6. Troubleshooting
Error
Inlet nozzle of the
flow meter is leaking.
English
Cause
1. The filter is not installed correctly.
2. There is a gap in the joint between the connection and the
filter disc.
Make sure that the filter sits properly in the inlet opening.
Use the PTFE thread sealing tape to wrap the tap hose or add a
washer when connecting the flow meter.
15