Idiomas disponibles
Idiomas disponibles
EN
1. Apply the appropriate amount of gel to the face and neck.
2. Switch on the device and switch to DMA-i-RF or RF mode.
3. Apply the massage head to the skin and slowly make circular movements,
massaging from the bottom to the top.
4. The treatment lasts 6 minutes, while a 3-minute timer reminds you to change
the working area. Do not apply the massage head to one area for too long.
5. Wipe off the massage head and then replace the cover.
- "DMA" mode [page 3 - f3]
1. Apply an appropriate amount of gel to the face and neck.
2. Turn the device on and switch to DMA mode.
3. Apply the V-contour roller to the face, move at a constant speed.
4. An intelligent 3 minute timer will remind you to change the massage area.
Tips
1. The operating time of the DMA+RF and RF mode is 6 minutes. The unit will
switch off automatically if no movement is made. The clock will be reset if
switched to another mode.
2. The unit has a memory function that will restore the last mode when switched on.
3. The device is equipped with a temperature control system, but we
recommend that you do not hold the massage head on one area for more than
3 seconds after using the RF function.
Contraindications
1. Not to be used on children.
2. Not to be used in persons with implanted electronic organs and
electromagnetic hypersensitivity.
3. Not to be used in case of cancer, suspected cancer or precancerous lesions,
especially skin cancer or precancerous nevi.
4. Not to be used in patients with thyroid disease, haemophilia and
haemorrhagic diseases.
5. If you have had mini-plasty or botox treatment, consult your doctor before
using the device.
6. Do not use on people with damaged or excessively tanned skin, abscessed,
inflamed or scarred skin.
7. Do not use on pregnant or breastfeeding women,
8. Do not use on persons with metal restorations or braces.
9. Do not use on the same area of skin for a long period of time.
10. Do not apply the massage head and V-roll to the eyes.
11. remove watches, glasses and other metal objects before using.
Do not [page 3 - f4]
10
