Idiomas disponibles
Idiomas disponibles
Category
Eyepiece
Objective
Viewing Head
Total Magnification
Working Distance
Base
Stage
Focusing
Arm
Illumination
Whole Size
N.W
Package
D) Principle
Using stereo microscope can get third dimension image, is due to can gather image from different directions by two objectives, then
form different images on the eye's retina by two eyepieces. From the wide field eyepiece,can get a upright and third dimension image
by binocular head. The left eyepiece tube with diopter ring, if the viewer's binocular degree are slightly different, you can adjust
focusing knob so that right image to be clear, then rotate the left diopter so that the image to be clear. Binocular can be rotate in a
certain angle to adjust the interpupillary distance.
This microscope has two pairs of different magnification objectives, can achieve different magnification's transform by turning the
nosepiece (turn the objective cover), easy operation and fast, objective magnification are marked on the cover.
E) How to Use
1.Open the package and take out the microscope, insert the desired eyepiece, put on the rubber eyepiece cover and tighten the
anti-theft screws( ensure the eyepiece free rotation)
2. Take off the objective cover, switch on. Select appropriate light source (top light or bottom light).
3. Put the objects in the centre of stag, then adjust the focusing knob. (When using YJ-T101G pole type stereo microscope, relax locking
knob, then the observing head should be positioned in a appropriate height according to the objects' thickness, this distance should be
about 70-80mm from the bottom of objective cover to the objects surface). Observe the right eyepiece to make the image
clear(depending on the situation to select brightness). Adjust the left diopter again to make left and right images both clear.
F) Maintenance and Care
1. Whether the instrument in use or storage, should avoid dust, humidity, cold, heat or PH steam.
2.Chemicals shall not be placed near the instrument, even more in
the microscope cabinet (except desiccant).
3.When not in use, the whole instrument should be covered by
dust cover to keep it clean. If there is dust on the lens surface, don't wipe it by hand, only by brush.
4.If there is dust on the lens surface, can use clean old linen or cotton cloth dipped in a small amount of pure alcohol and ether mixture
(1�1),or benzoline and xylene to wipe gently. Don't touch the lens surface by finger.
5.Due to time, grease on gear, rack, sliding groove surface and sliding cylinder will bond with dust into dirt or hardened, lead to rotating
the coarse knob difficultly, can use xylene to clean, then add a little acid-free animal grease or acid-free vaseline, can't use other grease.
6.When microscope and eyepiece are not in use, should be covered with cloth or glass to prevent dust.
7.Do not put the plastic package a place your kids can reach. If not, the kids may put the plastic into the mouth and suffer from
suffocating.Always supervise children using a optical device.
8.Store the product in a ventilated, dry, clean place or put it in a dry box.
9.Please do not disassemble or repair the product yourself. If you need to repair it, please contact our professional after-sales
department.
10.Do not use non-waterproof products in wet environments, use waterproof products in wet environments, and dry them after use.
G) Complete Sets
Technical Specification
Standard 1pair of WF10X (WF15X or WF20X optional )
Standard 2X, 4X (1X, 2X or 1X, 3X optional)
Articulated binocular head, 45°inclined, 360°rotatable。Interpupillary distance 50-75mm
adjustable, with a left diopter
Objective Magnification X Eyepiece Magnification
100mm(The theoretical distance of lens from objects surface when the
image is clear)
Dimension 210X140X50mm，with clips
Diameter Ø 95mm，one frosted glass(using bottom light source), and
one plastic black-white plate (using top light source)
Rack and pinion focusing, with a focus torque handle wheel. Focusing
Range: 40mm
Arm type, arm height 180mm。
Top and bottom high brightness LED lamp, brightness can be adjusted
independently
210X140X360mm
2.5kgs
Foam+ carton, package size 67X40X41cm(4sets/ctn)
03
