Amana NAH6800 Guía De Uso Y Cuidado página 14

Ocultar thumbs Ver también para NAH6800:
Idiomas disponibles

Idiomas disponibles

The motor
increases
speed to spin the tub to remove
moisture
from the
High-pitched
sound
during a spin cycle,
load.
Flushing
water
sound
coming
Detergent
is dispensed
at the start of the cycle. Bleach is dispensed
at the
from the dispenser
area.
appropriate
time in the wash cycle. Fabric softener
is dispensed
during the
third rinse while the washer
is filling.
Sloshing
or gurgling
water
The sealed balance
ring around
the tub contains
a liquid and is designed
to
sound
when washer
is off and the tub
make the washer
spin smoothly.
is rotated.
Whirring
or sloshing
sound
The tub rotates
one direction
followed
by a pause.The
tub reverses
followed
by a pause_
repeated
direction
and pauses.This
action
continues
throughout
the cycle.
throughout
the wash cycle.
\_/asher
maintains
a slightly
After reaching
the maximum
spin speed, the machine
may reduce
spin
reduced
spin speed
after achieving
speed
slightly for maximum
performance.
a higher spin speed.
The spin speed slows
down
The tumbler
will begin to accelerate to speed, then slows back down to
dramatically
when it sounds like an
redistribute
the load more evenly when an unbalanced load occurs.
out-of-balance
load.
The washer
uses a true adaptive
fill and adds more water
during the wash
cycle as it is needed.
Water
is added
after
the
OR
washer
has been
tumbling
for a while.
Water
flows through
the dispenser
to dilute and add bleach or fabric
softener
at the appropriate
time.This
will occur even if bleach and fabric
softener are not used.
Clicking/draining
sounds
when
Before the washer
starts
to fill, it will make a series of clicking noises to
washer is started,
check the door loci< and do a quick drain.
M3
loading