Premier TAB-5549-8G Manual De Instrucciones página 39

 When the battery is fully charged (the battery icon will stop scrolling), disconnect the Tablet PC from
the travel charger, and then pull it out from the power jack.
 Using USB cable to charge
Before charging, please make sure that the Tablet PC has been turned on.
1. Plug one end (micro USB) of the USB cable into the multifunction socket.
2. According to the type of USB cable, connect the other end to the computer's USB port , you may need
to wait for a moment to begin charging.
3. When the battery is fully charged (the battery icon will stop scrolling), disconnect the USB cable from
the Tablet PC, then pull it out of the computer.
Insert memory card (optional)
If you want to store other multimedia files, you can use the SD card or insert the memory card. The
Tablet PC can use micro SD™ or micro SDHC™.
The Micro SDHC™ memory card has a capacity up to 32GB.
 The Tablet PC supports only the FAT file structure. If you insert a memory card with other structure,
the Tablet PC will ask to re-format the memory card.
 Frequent adding and deleting the data will shorten the life span of the memory card.
 When you insert the memory card to the Tablet PC, The file catalog in the memory card will appear
in the folder of the file management.
1. Remove the back cover.
2. The golden spot of the memory card should be face down when inserting it into the Tablet PC.
3. Push the memory card into the card slot until it locks into place.
4. Replace the back cover.
 Removing the memory card
1.Remove the back cover.
2.Pull out the memory card from the card slot.
3.Replace the back cover.
Please do not remove the memory card when transferring or accessing information in the Tablet PC,
Otherwise it may cause data loss or damage the Table PC and memory card.
 Formatting the SD card
1.Formatting the memory card on the computer may result in the memory card not being compatible with
P-4
Inserting the memory card