Idiomas disponibles
Idiomas disponibles
Setting
Description
1) Metric
Change speed unit from km/h to mph
2) Wheelsize
Change rpm – distance travelled ratio
Defines the language in which messages are displayed on the monitor.
3) Language
Options: Spanish, Portuguese, English, French, German, Dutch, Italian.
Establishes the calculation rate for the steady watt rate program.
4) SWR time
This option is only available on models that include the steady watt rate program.
Options: Value in seconds (minimum 20, maximum 60)
Establishes the calculation rate for the steady pulse rate program.
5) SPR time
Options: Value in seconds (minimum 20, maximum 60)
Establishes a maximum time limit for the exercise.
Options: - 0 (No maximum time limit established)
6) Manual T
Options: - OFF (The default welcome message is displayed)
7) Text
For personalizing the welcome message, including, for example, the name of the
gymnasium.
Enables or disables sound messages emitted by the monitor.
Options: - ON
8) Sounds
ELEMENTS OF THE ELECTRONIC MONITOR (Fig.1).-
The electronic monitor is made up of two distinct areas: Monitor pictured pages 2 and 3.
The top area, Fig.2 (A – B – C) for the DISPLAY.
The bottom area, Fig.3 (D – F – G) for the KEYPAD.
DISPLAY.-
This is comprised of two screens.
(A) The top LED array, which displays real-time exertion levels being produced during the selected
program.
(B)
Bottom alphanumeric screen, which guides the user selection options and exercise.
The top screen (A) displays the various pre-programmed exercise profiles (programs) that we can select
during exercise as well as current exertion levels.
The bottom alphanumeric screen (B) is used to guide the user when selecting the exercise and displays
information about the exercise both during and after the session. The LED indicators (C) located below the
alphanumeric screen gives a simultaneous readout of SPEED / R.P.M; TIME / DISTANCE; CALORIES /
WATTS; PULSE RATE / BLUETOOTH and indicates which information is being displayed throughout the
exercise.
The data that is displayed on the LEDs (C) during exercise are as follows:
- SPEED: This shows an estimated value of the linear velocity at which a bicycle would be travelling based
on the user's pedalling rate. The value is displayed in kilometres per hour (km/h or mph)
-RPM: This shows the current pedalling rate during exercise. It indicates the number of full turns that the
crank makes in one minute (RPM).
-TIME: This shows the time that has elapsed since you started the exercise, or if a time limit has been
established, the amount of time left before the exercise finishes. The time is displayed in minutes and
seconds (mm:ss).
PERSONALISED SETTINGS PANEL
Exercise time limit values in minutes (maximum 60)
- ON (Allows the welcome message to be edited)
(Enabled)
- OFF (Disabled)
17
SK
LINE
sportkoncept
