Idiomas disponibles
Idiomas disponibles
General Inspection Chart
NOTE: Disassemble crane, including boom and winch, periodically to inspect each for damage. Use the
following chart to determine what type of inspection is necessary. Frequent Inspection (F) and Periodic
Inspection (P).
Location
Wheel Base
Foundation
Fasteners
(including mounting
fasteners)
Handle
NOTE: Please refer to the winch Operator's Manual for the winch inspection chart.
Repairs
All repairs must have factory authorization. Contact OZ Lifting Products, LLC
warranty and potential damage. Perform recommended inspections to identify which parts should be replaced. Only use
OZ Lifting Products, LLC
®
dealer. Please have the serial number, part number and a description available when calling.
Check For
Damage, cracks, rust, chipping, dents excess wear, or corrosion.
Unusual sounds
Smooth load movements
Equipment properly lubricated
Signs of overloading (cracks, dents, or damage)
Proper function when operated with a load equal to the load rating
Good condition/supports the crane under all conditions
Level, no swerving of boom
Cracks, corrosion, damage (check by removing crane base from foundation)
Firmly installed
Properly tightened
Stripped threads, bent, or damage (check by removing crane from foundation)
Rotates freely in both directions
replacement parts. To order replacement parts, contact your local OZ Lifting Products, LLC
Wheel Base Operator's Manual • OZ Lifting Products, LLC
MAINTENANCE
®
to prevent voiding of the two-year limited
®
• 1/2024
F P
X
X
X
X
X
X
X
X
X
X
X
X
X
®
33
