Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
STACKING THE WASHER AND
DRYER{if desired){cont.)
INSTALLING THE STACK BRACKET
KIT
KIT GE FL STACK CONTENTS
0 Right hand bracket
04 #12 x 1" screws
17 Left hand bracket
A
174 #8 × 1/2" screws
04 rubber pads
TOOLS YOU WILL NEED
17 Phillips screwdriver
17Gloves
ClOpen-ended
wrench
C1Level
C1Pliers
INSTALLATION
PREPARATION
Remove the packaging.
Flatten
the
product
carton
to use as a pad to
lay the dryer
down
on its side. Continue
using
the carton
to protect
the finished
floor in front of
the installation
location.
[i] REMOVE THE DRYER LEVELING LEGS
A. Carefully lay the dryer on its side. Use the packing
material
so you don't scratch
the finish on the
dryer.
8. Use an open-end wrench or pliers to remove the
dryer leveling legs.
Back out and remove
all 4 leveling legs
[]
INSTALL RUBBER PADS TO DRYER
BASE
Locate
the 4 rubber
pads in the parts package.
Remove
the
adhesive
backing
and firmly
place
over
on the
bracket
where
you
removed
the
leveling legs.
41
Capítulos
Tabla de contenido
