Idiomas disponibles
Idiomas disponibles
Installation
Drain hose connection
The end of the drain hose must be connected directly to the drain or sink.
WARNING! Do not kink or lengthen the drain hose, otherwise it may be damaged due to possible
water leakage.
If the drain hose comes out of its housing during water drainage, your home could be flooded and you
could suffer burns due to the high water temperatures during the washing process. during the washing
process. Securely fix the drain hose to avoid these situations and to ensure that the drainage situations
and ensure that the water intake and drainage processes take place safely.
There are two ways of attaching the intake end of the drain hose:
Option 1. Place the end of the drain hose into the
sink, using the clamp provided, as shown in the
picture.
Note: In case you connect the drain hose as option 1, To prevent backflow of dirty water into the machine
and to facilitate draining, do not immerse the end of the hose into the dirty water and do not insert it into
the drain more than 15 cm.
Quick start
Before use, make sure that the dryer is installed correctly.
Before each drying
Drying
After drying
When the drying programme is finished, a beep will sound and the display will show "0:00".
1
Note: If using the socket with a switch, press the switch to turn off
the power directly.
Min. 70cm
Max. 125cm
1
Connect
Turn on
Select
programme
2
3
Option 2. Connect the end of the drain hose
directly to the sink drain socket, as illustrated in the
picture.
2
Load
Close the
door
Select
function
4
5
1. Open the door and take out the
clothes.
2. Take out the tank.
3. Pour out the condensed water.
4. Clean the door filter.
5. Switch off.
31
English
3
Play
infiniton.es
