Idiomas disponibles
Idiomas disponibles
Plate position - beneath flat bottom cabinet
At least 30" ——.
Draw a vertical line on the wall at the center of the
30" wide space.
Tape the Rear Wall Template onto the wall matching
the centerline and touching the bottom of the cabinet.
Plate position - beneath framed recessed cabinet
bottom
&
30" to Cooktop
Draw a vertical line on the wall at the center of the
30" space.
Tape the Rear Wall Template onto the wall
matching the centerline and touching the bottom
cabinet frame.
Plate position — beneath recessed bottom cabinet
with front overhang
Draw a
line on the back
=,
wall equal to the depth
a
of the front overhang.
a
30" to Cooktop
y
Your cabinets may have decorative trim that
interferes with the microwave installation. Remove
the decorative trim to install the microwave properly
and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the front overhang depth. This
will keep the microwave level.
1.
Measure the inside depth of the front overhang.
2.
Draw a
horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
3.
For this type of installation with front overhang
only, align the mounting tabs with this horizontal
line, not touching the cabinet bottom as
described in Step D.
