Idiomas disponibles
Idiomas disponibles
Aligning the wall plate
il
|
\\
i
:
REAR WALL TEMPLATE
i
t
i
t
'
i
'
Draw a Vertical Line on
Area A
;
'
Centerline
Wall from Center of Top
vofececeneed notches Sy |g — Cabine! ene ;
i
¥
(J
Ig
@
0.0.6.0.060000
0000000600006
0!
jo
O,0
©
6
0
9.9.9
0
0
G@
0
0°
ga
9
0
0
00
a,a-In
g
Horizontal Line
Area E
Hole'C
Hole B
Horizontal Line
Draw a Horizontal line on wall from bottom
of "Rear Wall Template'
CAUTION: Wear gloves to avoid cutting fingers on sharp edges.
Draw a Vertical line on the wall at the center of the 30" wide space.
2.
Draw a Horizontal line on the wall along the bottom of "Rear Wall Template?
3.
Drill 5/8" holes for toggle bolts on 3 locations (Hole A, Hole B, Hole C) but if the location of hole is same as
that of stud, drill a 3/16" hole for wood screw. In other words, toggle bolt can not be used at the location of
stud.
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
NOTE:
Holes A, B and C are inside area E. If none of A, B and C is in a stud, find a stud somewhere in area E
and draw a forth circle to line up with the stud. It is important to use at least one wood screw mounted firmly
in a stud to support the weight of the microwave. Set the mounting plate aside.
10
