Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
Always clean the appliance and its
attachments after use and before storing.
1. Unplug Commercial Immersion Blender
before cleaning.
2. Remove the attachments by twisting (see
"Operating the Commercial Immersion
Blender" section).
3. Wipe the motor body and attachments
with a damp cloth. Mild dish soap may be
used, but do not use abrasive cleansers.
NOTE: Do not immerse the motor
body in washing solution, rinse water
or sanitizing solution.
TROUBLESHOOTING
If the Commercial Immersion Blender has stopped working, check for
the following:
Unit has been unplugged
• Release the power button.
• Check the power supply.
Machine has overheated
• Release the power button.
• Unplug the unit.
• Wait a few minutes for the motor to cool
down and the thermal safety mechanism
to reset.
Unknown
• Release the power button.
• Unplug the unit.
4. Wipe power cord with warm, sudsy
cloth; then wipe clean with damp cloth.
Dry with soft cloth.
Commercial Immersion Blender
attachments
Wash blending attachments in hot, soapy
water, or in the dishwasher. Dry thoroughly.
• Restart the Commercial Immersion
Blender as instructed in "Operating Your
Commercial Immersion Blender".
• Restart the Commercial Immersion
Blender as instructed in "Operating the
Commercial Immersion Blender".
• Check the following:
- electrical plug for damage
- blades for freedom of movement
(food may be lodged between blades
and plastic guard
- power cord for cuts or other damage
- drive shaft for freedom of rotation
(check by removing the attachment arm
and rotating the shaft manually)
11
