Special Warnings; Other Warnings; User Manual - PNI ESCORT HP 9500 Manual De Usuario

SPECIAL WARNINGS

Please read the following warnings to prevent fire, personal injury or damage
to the radio.
Do not attempt to adjust the radio while driving, as it may endanger your life
and other passengers.
This radio is designed for 12V or 24V DC power supply.
Do not place the radio on an excessively dusty, damp or unstable surface.
Do not connect the antenna during transmission; risk of combustion or electric
shock.
Please keep your distance from devices that cause interference (such as: tv,
generator, etc.)
Those who use pacemakers are advised to keep their distance from the antenna
during transmission and especially not to touch it.
Do not bring metal objects near the internal electrical part; danger of electric
shock.
Avoid exposing the radio to temperatures below -26°C and above + 60°C, the
temperature on board a vehicle can sometimes exceed 80°C, which can cause
irreparable damage in case of long exposure. Do not expose the radio to long
sunlight.
Do not place anything on the radio, it will prevent it from cooling.
Check to see if the battery is sufficiently charged to avoid discharging quickly.
It is important to stop the radio before starting the engine, in order to avoid the
damage caused by the high voltage at start-up.
When replacing the fuse, you must use a 2A 250V F-type fuse. Under no
circumstances do you use a fuse with a higher value.
If an abnormal odor or smoke is detected coming out from the radio, switch off
the device immediately.
Do not transmit for a long time,the radio can heat excessively.

OTHER WARNINGS:

Before you connect or use this product, please read these operating instructions
carefully. Keep this user manual for future use.
Before using the radio, please connect the antenna. Check the SWR before
transmitting. A too high SWR can lead to the destruction of the internal
components of the radio, which are not covered by the guarantee.
None of the inner components of the radio can be repaired by the user. In case of
damage, contact an authorized centre.
To prevent the risk of fire, use only the recommended power supply.

User manual

2