Idiomas disponibles
Idiomas disponibles
3.
Select the maximum temperature mode.
4.
Hold the iron vertically and press the steam burst button, an intense steam will be ejected
from the soleplate.
Dry ironing
Set the temperature knob to the
Steam ironing
1.
Unplug the iron and fill it with water.
2.
Plug the power cord into the power supply.
3.
Turn the temperature knob and select the desired type of fabric.
4.
When the LED indicator changes, the iron will be ready to be used.
5.
When finished, select MIN and unplug the appliance.
Warning
Make sure the LED indicator has changed. If you use the soleplate before that, it could leak
since it has not reached the optimal temperature.
Warning
The iron will only produce constant steam when it is placed horizontally. To stop the continuous
steam flow, place the iron in an upright position.
-
The steam function can only be activated when the iron is operated at medium or high
temperature.
-
If the selected temperature is low, the iron's soleplate could leak.
Safe start up without heated soleplate
As a safety measure, when the iron is turned on, the soleplate does not generate heat.
Ironing synthetic clothes
Minimum temperature and no steam operation (70ºC-120ºC.)
Ironing wool/silk
Medium temperature and no steam operation (100ºC-160ºC.)
Ironing cotton/linen
High temperature and steam operation (140ºC-200ºC.)
Steam burst
By pressing the steam burst button, an intense burst of steam is emitted from the soleplate.
This function can only be activated during high-temperature ironing.
·
··
···
. position.
ENGLISH
IRONHERO 3200 I-PUMP
41
