Idiomas disponibles
Idiomas disponibles
HOW TO CLEAN THE DRIP TRAY
• Remove the drip tray.
• Add some cleaning solution and rinse the drip tray under
the tap water. Then dry it with some cloth.
• After cleaning, install the drip tray again.
HOW TO CLEAN THE GRINDER
• After emptying the bean tank with the manual bean emp-
tying button (3), dispose of the ground coffee:
- Remove the grind setting knob counterclockwise.
- Remove the internal grinding wheel counterclockwise.
- Clean the grinding wheel with the cleaning brush and
empty the ground coffee at the gap.
- Clean the grinding chamber with the cleaning brush.
• Do not install the grinding wheel, and install the grind
setting knob well in place again.
• Press the button on the grinder.
• Let the grinder keep running to remove the remaining
powder in the grinding chamber (please repeat the opera-
tion of steps 3 and 4 if there is coffee powder left).
• Remove the grind setting knob counterclockwise.
• Install the grinding wheel clockwise.
• Install the grind setting knob clockwise, and the cleaning
is completed.
HOW TO CLEAN THE BREWING SYSTEM BRACKET
• When the appliance is powered on, hold and press the
manual clean key (4.1) and double-cup espresso (4.7)
for 1 second to enter into the mode for cleaning the dead
corner, behind the brewer group.
• After entering the brewer-cleaning function, the brewer
moves to the bottom.
• After the brewing door is opened (the appliance stays in
the safe protection state), the dead corner of the brewer
can be cleaned.
• After cleaning, close the brewing door.
• Hold and press the manual clean key (4.1) and dou-
ble-cup espresso (4.7) for 1 second to exit from the
cleaning function.
HOW TO CLEAN THE POWDER-DISPENSING
CHANNEL
• Hold and press the bean-emptying key (3) and single-cup
espresso key (4.8) for 0,2 seconds at the same time.
Their corresponding indicators flash, and the door is
opened.
• Open the door and loosen the ground coffee in the pow-
er-dispensing channel with the cleaning brush, and then
close the door when there is ground coffee falls.
• Hold and press the bean-emptying key (3) and single-cup
espresso key (4.8) at the same time again for at least 0,1
seconds, then their corresponding indicators extinguish,
and the door is closed.
HOW TO CLEAN THE BREWING SYSTEM AND
FROTHING SYSTEM MANUALLY
• Fill the water tank with an appropriate amount of
room-temperature water, which shall not exceed the MAX
water level, and then close the water tank lid.
• Install the brewer assembly into the brewing chamber
of the appliance and then close the door of the brewing
chamber.
• Put the drip plate on the drip tray and then place a con-
tainer on the drip plate.
• Activate the manual clean function to clean the brewing
system and milk-frothing channel. After preheating, all the
functional indicators illuminate solidly, and the appliance
goes into standby mode. Hold and press the manual
clean (4.1) for at least 0,2 seconds. The appliance will
enter the manual clean process.
NOTE: If you need to clean the milk-frothing channel,
please install the milk reservoir and fill the milk reservoir
with home-clean water instead of milk. If you do not need
to clean the milk-frothing channel, please close the plug
of the milk frother well in place.
• After cleaning, the appliance goes into standby mode
automatically.
• Open the door of the brewing chamber and clean the
coffee grounds in the brewing system with the cleaning
brush.
HOW TO DEAL WITH LIMESCALE INCRUSTATIONS
• The appliance needs to be descaled when the indicators
of hot water (4.3) and manual clean (4.1) will flash at the
same time.
• Fill the water tank with water and descaler to the MAX lev-
el as indicated on the water tank. Follow the instruction of
your descaler product in order to know the ratio between
water:descaler needed. You may also use citric acid
instead of the descaler (one hundred parts of water and
three parts of citric acid).
• Put a liquid container on the drip plate.
• Hold and press hot water (4.3) and manual clean (4.1) for
1 second at the same time, and the appliance starts the
descaling procedure.
• The whole descaling procedure lasts for about 10 min-
utes. The function indicators flash slowly from left to right.
• After the descaling is completed, the indicators of hot
water (4.3) and manual clean (4.1) stop flashing.
