Changing
Presser
Foot
_1_ Lever
_Groove
_Pin
• To remove: Turn the handwheet toward you to raise the
needle to its highest position. Press the lever _on
the
back of the foot holder. The presser foot wilt drop off.
• To attach: Place the presser foot so that the pin _ on the
foot lines up directly below the groove _of
the foot holder.
Lower the foot holder to lock the foot in place.
Presser
Foot Types
• zigzag foot
Use this foot for both straight and zigzag stitching.
For:Straight stitch
(Page 32)
Topstitching
(Page 34)
Basic zigzag
(page 40)
Bar tacking
(page 44)
Button sewing
(page 44)
Overcasting stitch
(page 46)
Blind hem stitch
(page 48)
Lace work
(page 48)
Multiple zigzag stitch
(page 50)
Straight stretch
(page 52)
Rick-rack stretch
(page 52)
Overcast stretch stitching
(page 54)
Feather stitch
(page 54)
• Straight stitch foot
Use this foot exclusively for straight stitching with the
center needle position.
For:Straight stitch
(page 32)
Topstitching
(page 34)
Straight stretch
(page 52)
• Sliding buttonhole foot
Use this foot for manual buttonhole making. It is marked
to help you measure a buttonhole accurately.
For:Buttonhole sewing (page 56-58)
S
S
\
S
• Zipper foot
The edge of the foot guides the zipper and keeps the
seam straight.
For:Zipper sewing (page 34-36)
S
• Satin stitch foot
Use this foot for satin stitching and outlining applique.
For:Satin stitch
(page 40)
Monogramming
(page 42)
Applique
(page 42)
S
12
S
