Kathrein EXR 1542 Instrucciones página 8

System example (Symbolic representation)
Sat-IF
*) EMU 250 (5-way connector), Order no. 20510044 available optionally. Not supplied in EXR 1542/2542 delivery scope
**) KAZ 11/KAZ 12 overvoltage protector
Possible causes of faults and their remedies
Problem
Multi-switch fails to switch
Multi-switch operates,
but no associated picture
appears
Electronic equipment is not household waste - must be disposed of properly in accordance with directive
2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27
and electronic equipment. At the end of its service life, take this unit for disposal to an appropriate offi cial
collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 10 04 44 • 83004 Rosenheim • Germany • Phone ++49 (0) 8031 184-0 • Fax ++49 (0) 8031 184-306
EBC 110
Possible cause
No control signal from
receiver, or incorrect control
signal
Incorrect single-cable
frequency
*)
4 connections per living unit
Solution
Check that there are no short circuits in the connection from the
receiver to the multi-switch. Check the receiver menu settings
(single cable mode!). Operating voltage on receiver output should not
be greater than 14 V
Check menu settings of all connected receivers.
Check that frequencies are assigned to one receiver only
936.4141/-/ZWT/0111/e - Subject to technical change!
EBC 110
th January 2003 on used electrical