JBM 54339 Manual De Instrucciones página 6

ASSEMBLY
Open the battery cover.
Insert the two batteries (pay attention to the
polarity of the batteries).
Put the lid on and turn it to lock.
OPERATION
Turning on
Press C to turn on the wrench.
Unit measurement selection
Press U to select the unit of measurement you
prefer (the default unit is Nm). There are 4 types
of units you can select:
Hay 4 tipos de unidades que puede seleccio-
nar:
-Nm
-In/Lb
-Ft/Lb
-Kg/cm
You will be able to see the unit of measure-
ment on the right side of the screen.
Torque value selection
Press to select the torque value.
Angle selection
Press the M key to select the angle. There are 6
stored values (M1 to M6).
Press the keys to select the degrees.
Once you have selected the degrees, press
U to select the function. This wrench has two
functions:
- Trace mode
- Peak mode
The trace mode allows you to check the tor-
que level applied at any time. Therefore, the
moment you stop applying force, the screen
will show 0.
The peak mode also allows you to observe the
torque you are applying, but the moment you
stop applying force the display will show the
highest torque value the wrench has recorded.
In the screen you can see the currently mode.
- "T": Trace mode
- "P": Peak mode
If you want to change the function, press the
keys.
Once the function is selected, press C to return
to the main screen.
Trace mode
Seleccione el valor de torque al que quiere
apretar.
Empiece a ejercer fuerza con la llave.
Una vez haya llegado al nivel de torque se-
leccionado anteriormente, la llave mostrará
automáticamente los grados en pantalla, em-
pezando por 0º.
When you reach the 85-90% of the target va-
lue, the green indicator will turn on and the
buzzer of the wrench will beep intermittently.
If you exceed the target value, reduce the for-
ce.
When the target value has been reached, a
red light will illuminate and the key will beep
continuously.
Peak mode
Select the torque value you want to tighten.
Start exerting force with the wrench.
Once you have reached the previously selec-
ted torque level, the wrench will sound and
will automatically display the degrees on the
screen, beginning from 0º.
· 6 ·
REF.54339