JBM 54339 Manual De Instrucciones página 5

REF.54339
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
The dynamometric wrench is an essential tool
for works in automation or industry, as it helps
you tighten bolts and nuts with the pressure
specifications
detailed by the manufacturer. So, it avoids
problems caused by too much or not enough
pressure.
This dynamometric wrench includes a digital
screen where you can see the torque and the
degrees.
Also, it has a visual and auditory system which
helps you adjust the torque.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before
using the product.
Failure to comply with these ins-
tructions could result in personal
injury and/or damage
to the product.
Please keep the instructions for future referen-
ce.
Using overload (above the maximum opera-
ting torque value of 120%) may cause damage
to the wrench or loss of precision.
Do not shake the wrench vigorously or drop it
on the floor.
Do not use the wrench as a striking tool
Do not place the key in a place with high tem-
perature, high humidity or direct sunlight.
Do not use the wrench near the water.
Do not place the wrench near any magnetic
objects.
Do not place the wrench in a place with a lot
TECHNICAL SPECIFICATIONS
Torque range: 10-200Nm
Length: 530mm
Accuracy: Clockwise: ± 2%, anticlockwise: ± 3%
Measurement units:
-Torque: Nm, In/Lb, Ft/Lb, Kg/cm
-Degrees: 0-360º
Weight: 1.34kg
LISTADO DE PARTES
N.º Description
1 Change direction button
2 Ratchet head
3 LCD screen
4 Buzzer
5 Operation keys
6 Pressure point for calibration
7 Battery holder
8 Battery cover
9 Memory
10 LED light
11 Peak mode / Track mode indi-
cator
12 Battery indicator
13 Torque value
14 Unit display
15 On/off button
16 Torque unit setting button
17 Memory selection button / Lock
button
18 Up / down button
19 Angle value
· 5 ·