Idiomas disponibles
Idiomas disponibles
Drive 3 / 4"(19mm)
locking screws through
frame
holes into window sash (Fig.9/10).
To secure lower sash in place, attach right angle
sash lock with 3 / 4"(19mm)
screw as shown(Fig.11).
I_
Cut foam seal and insert in the space between the
upper and lower sashes (Fig.12).
Fig.13
Storm window
11/2"MIN
frame
or other
(38 mm)
Board
thickness
If AC
is Blocked
by
Storm
Window
Add wood as shown in Fig.13,
or remove storm
window
before air conditioner
is installed.
If Storm Window
Frame must remain, be sure the
drain holes or slots are not caulked or painted shut.
Accumulated
Rain Water or Condensation
must be
allowed to drain out.
Removing
AC
From
Window
• Turn AC off, and disconnect
power cord.
• Remove sash seal from between
windows,
and
unscrew
safety lock.
• Remove screws installed
through
frame and frame
lock.
• Close (slide)
side panels into frame.
• Keeping a firm grip on air conditioner,
raise sash
and carefully
'rock'
air conditioner
backward
to
drain any condensate
water in base of unit. Be
carefully
not to spill any remaining
water while
lifting unit form window.
Store parts WITH air
conditioner.
13
