Idiomas disponibles
Idiomas disponibles
AIR CONDITIONER
FEATURES(CONTINUED)
FOLLOW
ME FEATURE:
Auto
Auto
Cool
Low
Dry
Med
Fan
High
_'aevr_r y
Oa/Off
j
Light flashing
/
NOTE:
This feature can be activated
from the remote
control
ONLY. The remote control
serves as a
remote thermostat
allowing
for the precise
temperature
control
at its location.
To activate
the Follow Me feature,
point the remote
control towards
the unit and press the Follow Me
button. The remote display is actual temperature
at its location.
The remote control will send this
signal to the air conditioner
every 3 minutes
interval.
If the unit does not receive the Follow Me signal
during any 7 minutes
interval,
the unit will beep to
indicate
the Follow Me mode has ended.
The actual temperature
can be displayed
at the unit
by pressing
the Fan Only mode.
When in the Cool
mode, the unit display
indicates
the set temperature.
ADDITIONAL
THINGS
YOU
SHOULD
KNOW
Now that you have mastered
the operating
procedure,
here are more features
in your control that
you should become familiar
with.
• The Cool circuit
has an automatic
3 minutes
time delayed
start if the unit is turned offand
on
quickly. This prevents
overheating
of the compressor
and possible
circuit breaker
tripping.
The fan will continue
to run during this time.
• The control will maintain
any set temperature
within I°F, between
62°F(17°C) and 86°F(30°C) degrees.
• The control is capable
of displaying
temperature
in degrees
Fahrenheit
or degrees
Celsius.
To convert
from one to the other, press and hold the Left and Right Temp/Timer
buttons
at the
same time for 3 seconds.
Fresh
Air
Vent
Control(10,000Btu/12,000Btu
Models):
Figure
1 (VENT CLOSED)
Figure 2 (VENT OPEN)
The Fresh Air Vent allows the air conditioner
to:
1. Recirculate
inside air- Vent Closed (See Fig.l)
2. Draw fresh air into the room- Vent Open (see Fig.2)
3. Exchange
air from the room and draws fresh air into
the room-
Vent and Exhaust
Open (see Fig.3)
Figure 3 (VENT & EXHAUST
OPEN)
9
