Idiomas disponibles
Idiomas disponibles
ENG
Safety instructions
1. Read and save this manual for future reference.
2. Only for household use. Not for commercial use.
3. Do not use this product outdoors. Keep it away from heat sources,
direct sunlight, humidity, liquids, and physical damage. Do not use with wet
hands. If the appliance is humid or wet, unplug it from mains immediately.
4. Before cleaning, storage or if the product will not be used for a longer
period of time, power the product off. When disconnecting from power
always pull the plug from the power outlet, do not pull the cable.
5. The product and power cable must be checked regularly for signs of
damage. If damage is found, you must stop using the product.
6. Keep all packaging out of reach of children. Do not let children play with
the plastic foil. Risk of suffocation!
7. Do not leave this product unattended for hours at a time. Do not leave
your home while the product is operating.
8. Never put your fingers or other objects through the fan's protection
grille.
9. Please note that long hairs can be caught in the fan.
10. The product must be fully assembled before use.
11. The fan must be placed on a stable surface to prevent accidental
tipping.
12. Do not use the product in areas or rooms where gasoline, paints or
inflammable liquids are used or stored.
13. The fan must only be used in upright position.
14. Do not place or use the product near stoves or other heat sources.
15. Do not attempt to repair the product or the power cable. Instead
contact an authorized technician, for example a company that specializes
in fan repairs.
16. This product can be used by children aged from 8 years and above
and by persons with reduced physical, sensory, or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the product in a safe way and understand the
hazards involved.
17. Children shall not play with this product.
18. Cleaning and user maintenance shall not be made by children without
supervision.
19. CAUTION: Do not immerse the appliance into water for cleaning. It
might result in an electric shock or fire.
20. Always remove the mains power plug before cleaning the product.
Battery safety
21. Do not charge non-rechargeable batteries.
22. Keep batteries away and out of reach of children!
23. Do not disassemble batteries!
24. Insert batteries correctly, by observing the polarity marking!
25. Do not expose batteries to intense heat, such as sunlight, fire or other
heat source. Risk of explosion.
26. Do not short circuit the batteries. Risk of explosion.
27. Do not mix batteries of different types or new and used batteries.
28. Batteries can leak battery acid. If the remote control will not be used
for a long period of time, remove the batteries.
29. In case of leaked battery acid. Do not to rub the liquid into your eyes
or mucous membranes. In case of contact with battery acid, wash your
hands and rinse your eyes with clean water. Seek medical attention if any
discomfort persists.
30. Do not dispose of batteries as regular household waste. Instead follow
local regulations for disposing batteries. There should be dedicated battery
collection bins.
1. Indicator LED (Sleep)
2. Indicator LED (Oscillation)
3. Indicator LED (Wi-Fi)
4. Display
5. Indicator LED ("H" = Hours)
6. Swing button (Oscillation)
7. Fan mode button
8. On/off button
9. Timer button
10. Speed button
11. Indicator LED (Fan mode: Nature)
12. Remote control
13. Base plate
14. Nut (under the base)
15. Fan tower
16. Compartment for remote control
Unpacking
1. Place a blanket where you intend unpack product. To prevent damage
to the product's exterior.
2. Lift the product out from the package. Make sure you get all parts and
this manual.
3. Remove all packaging material.
Assembly
1. Place the fan with the open side facing upwards.
2. Insert the cable through the hole of the base plate so that the plug is on
the underside of the base plate.
3. Remove the nut from the underneath the base.
4. Mount the base plate. The base plate can only be mounted in one
position.
5. Place the cable into the recess on the base plate.
6. Fasten the base place by screwing the nut.
7. Turn the fan over and place it on a flat and solid surface.
Remote control
Batteries are not included.
1. Remove the remote control from the compartment.
2. Open the battery compartment on the remote control.
2. Insert 2 x AAA batteries. Ensure correct polarity. Markings can be found
in the battery compartment.
3. Close the battery compartment.
Connect
1. Make sure that power outlet has matching voltage to this product.
(220-240V, 50Hz)
2. Connect the power cable to a power outlet. You will hear a sound and
the symbols on the display will light up briefly. The Wi-Fi LED indicator
will flash.
Note: The fan can only be used with 2.4 GHz. 5 GHz is not supported.
App installation
During setup the fan has a limited Wi-Fi range. It might help to place it
within 5 meters of your router.
1. Download and install the app "Deltaco smart home" from Apple App
Store or Google Play Store on your mobile device.
2. Launch the app "Deltaco smart home".
3. Create a new account or log in to your existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of product from the list.
6. Connect the device to power.
7. If the Wi-Fi LED does not flash: Reset the device.
You might have to activate Wi-fi by holding the speed button for 2 seconds.
If the status indicator flashes: Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
The device name will be used by Amazon Alexa and Google Home.
Reset Wi-Fi
1. To reset press and hold down the on/off button for about 2 seconds. The
Wi-Fi LED will flash quickly.
Wi-Fi
1. To activate or to deactivate Wi-Fi press and hold the speed button for
about 2 seconds. The Wi-Fi LED will turn on or off.
A N O R D I C B R A N D
7
