ZUMEX ESSENTIAL BASIC Manual De Usuario página 25

SUMMARY OF ZUMEX ESSENTIAL PRO AND VERSATILE PRO OPERATING MODES
Serial number New Pin
Voltage
Calibration
Pin
Counters
Serial number Partial Counters
Voltage Total Counter
Calibration Discounter
Pin
Counters
Partial Counters Total Counter
Total Counter
Discounter
76
Partial Counters
Total Counter
Discounter
CLEANING
For correct cleaning you must follow the steps below:
1
Turn the machine off at the mains.
2
Disassemble the front cover.
3
Disassemble the blade holder (Fig. 7) pulling it towards you by the handle.
Be careful! Handle this part with great care as you may cut yourself.
4
Remove the peel ejectors from their supports (Fig. 8).
5
Disassemble the pressing units in pairs after unscrewing the securing knobs (Fig. 9).
6
Disassemble the container and the juice filter (Fig. 10).
7
Disassemble the faucet (Fig. 11A).
Delete ?
Partial Counters Partial Counters
10
0
Discounter
Visible
Concealed
000000
Visible
Concealed
• The plastic parts of the squeezing system are suitable for cleaning in a dishwasher.
• We would not recommend cleaning the juice cover and tray in the dishwasher.
Following this tip increases its durability.
• The juice tap and tray must be separated for their correct cleaning, preventing dirt
from accumulating between both. The tap may be cleaned in the dishwasher.
• When cleaning the squeezing and cover area you should use a soft cloth dipped
in water and washing-up liquid. Then rinse thoroughly in clean water so no soap
remains.
• Once the cleaning process has finished, you must assemble all the elements in
reverse order to their disassembly. Make sure that all the parts have been correctly
assembled and secured.
• Remember that each peel ejector (Fig. 8) only fits on one side and so they are not
interchangeable. When you place them make sure that you insert the peel ejector
paddle right down to the end of the lower pressing unit.
• In order to avoid the accumulation of wax it is important to clean the fruit feeder
frequently of Zumex Versatile Pro models.
• On models with a base stand clean the hopper and the inside of the stand, making
sure to eliminate any peel or pulp remains.
RECOMMENDATION: Don't use the dishwasher to clean the cover nor
the tray. Doing thus reduces the durability of the parts owing to the
high temperatures of the automatic washing process. Follow the recom-
mendation and avoid cleaning at high temperatures.
For cleaning both parts use a soft cloth soaked in soap and water suita-
ble for crockery.
Under no circumstances must abrasive products be used nor any anti-
lime scale product.
47