Technical Service - ZUMEX ESSENTIAL BASIC Manual De Usuario

TECHNICAL SERVICE

The Zumex Essential Pro and Versatile Pro juicers provide you with the information
you need for correct unit maintenance. They are also fitted with a squeezed orange
counter which can be configured in this mode. Press the MENU key for a few seconds
to enter the menu and select TECHNICAL SERVICE, press ON to confirm your selection
and OFF to return to the previous menu.
SERIAL NUMBER: This shows you your juicer's serial number which is essential for any
TECHNICAL SERVICE consultation.
On the TECHNICAL SERVICE menu select SERIAL NUMBER and press ON to confirm your
selection. You can see the serial number on the screen. Return to the previous menu
by pressing OFF.
VOLTAGE: This shows you the mains voltage at the time of the consultation, vital for
any Technical Assistance Service.
On the TECHNICAL SERVICE menu select VOLTAGE and press ON to confirm your selec-
tion. You can view the voltage on the screen. Return to the previous menu, pressing
OFF.
CALIBRATION: This shows you the calibration value of your machine which must be
adjusted in exceptional cases when the counter is not counting correctly. This infor-
mation is vital for any Technical Assistance consultation. It also lets you change the
values manually. This procedure must only be carried out at the indication and with
the aid of an authorised Technical Assistance Service.
Calibration value: On the TECHNICAL SERVICE menu select CALIBRATION > CALIBRA-
TION VALUE and press ON to confirm your selection. You can view the calibration
number on the screen. Return to the menu, pressing OFF.
Offset Value: On the TECHNICAL SERVICE menu select CALIBRATION
> OFFSET VALUE and press ON to confirm your selection. You can view the offset
number on the screen. Return to the menu, pressing ON.
Calibrate: Select CALIBRATE and press ON. Next, set your PIN number and press
ON. The machine will ask for confirmation: 'Calibrate?', press 'ON' to confirm the
automatic calibration. The machine will then carry out said calibration and display
the adjusted calibration value. Return to the menu, pressing OFF.
This option must only be carried out under the supervision of the Technical Service
and when it has been specifically indicated.
PIN: Your juicer has a password so you can access the counters and modify configu-
ration parameters. The standard programmed PIN is 0000 but you can personalise
this PIN. On the TECHNICAL SERVICE menu select PIN and press ON to confirm your
selection. If this is the first time you have changed your PIN, the standard PIN 0000 will
appear and press ON; if you have already programmed a password previously, enter
the old password, use the cursors to select each digit, press OFF to move from
digit to digit and ON to confirm the password. Upon entering the correct PIN the "New
PIN" screen will appear. Programme the new password, select each digit with the
cursors , press OFF to move from digit to digit and ON to confirm the new PIN.
If you forget the Pin number programed, you will be required to reset machine's
MENU. In order, to do that, enter CONFIGURATION press
press button simultaneously.
COUNTERS: You can control the counter and discounter of your juicer. The counter
allows you to establish the no. of oranges squeezed, the discounter function allows
you to programme a given no. of oranges and gradually consume oranges from this
total.
Partial counter: This shows you the no. of oranges consumed and it can be set to
zero. On the TECHNICAL SERVICE menu select COUNTERS > PARTIAL COUNTER and
press ON to confirm your selection. Enter your PIN (Remember: Select each digit
with the cursor , press OFF to move from digit to digit and ON to confirm the
password). You can view the number of oranges squeezed on the screen. To set the
counter to zero press and confirm using ON and on the machine display you
will see that the counter has been set to zero. Return to the menu, pressing OFF
repeatedly.
button, and while pressed,
43