Sleep Function - Daewoo DRP-137 Manual De Instrucciones

3. Press the key (24) or
4. Press the ALARM1 (18) on the remote control to con rm and move to the next item.
5. Press the key (24) or
used as an alarm clock.
Note: if you select Radio, will play the last station listened to, and if you select USB, then
plays the rst song in the memory (you can not set a song).
6. Press !he ALARM1(18) to con rm and go to the next setting.
7. Use the key (24) or
8. Press !he button ALARM1 (18) to con rm and go to the next setting.
9. Use the key (24) or
10. Press the ALARM1 (18) to con rm. To set the alarm 2, press and hold the button for a few
seconds ALARM2 (20) on the remote control and repeat steps 3 through 10 above.
To disable the alarm
1. Press and hold for a few seconds the ALARM1 button (18) on the remote control. There
written 'Alarm1" and the word "ON" will ash.
2. Press (24) or
3. Press ALARM1 (18) on the remole control to con rm.
OFF THE ALARM
To disarm the alarm (Buzzer, USB or Radio), press FUNCTION/ALARM (11) on the unit to stop
completely.
lf you want to silence the alarm, press the ON/OFF, VOL, BASS/TREBLE (12) knob on the unit;
!he interruption lasts 9 minutes, alter which the alarm will turn on again.

SLEEP FUNCTION

The SLEEP (35) button on the remote control allows you to program the automatic shutdown
of the unit up to 90 minutes alter activation.
This function is activated when the unit is turned on. Adjust the sleep time by pressing SLEEP
(35) several times; the minutes are allowed:
90, 80, 70, 60, 50, 40, 30, 20, 1O, 00 (SLEEP OFF).
of the remote control to select 'ON".
on the remote to select the source (Radio, USB, Buzzer) to be
to set the time.
key to set the minutes.
(29) on the remote to select 'OFF".
EN
15