Radio Function - Daewoo DRP-137 Manual De Instrucciones

reference lo its Operating Manual.
3. From the external device search of devices and select "DAEWOO DRP-137"; if required, type
the code "0000".
4. When the connection with the external device will be the case, the "BT" on the display will
remain on steadily
Now you can start playing music from your device. With the keys on the remote control (
(24), (29) or the main unit l
(phone, tablet).
- Press (25) button to play or pause the song.
- Press (24) button to previous track.
- Press key (29) button to next track.
To connect a new device you need to switch the power to search mode:
- Press and hold the button
display will blink.
- Repeat steps 2 to 4 above.
Note: A paired device, it may happen that the connection is interrupted (for example,
when we wander too far from the unit); Normal/y the connection is restored automatically,
otherwise you need to back pairing.

RADIO FUNCTION

Auto Search
1. Press the FUNC (37) button repeatedly until the display will show FM radio frequency.
2. Press MEM key (33) for a few seconds on the remate control, or press for a few seconds the
SET/MODE (10) button on the unit to activate the ''AUTOSCAN" or the automatic tuning
(the radio starts an automatic station search and automatically saves in memory). They are
saved in the top 20 issuers radio.
3. Press the M+/10+ (22) key on remote control to call and listen to the various radio stations
saved in memory.
Manual Search
1. Press and hold buttons
radio frequencies; The search will stop when a radio station is received.
2. Press once the keys
3. To save the received station, press MEM (33) button, the display will ash the memory
location; using the keys
again MEM (33).
Note: For the best FM reception extend the antenna. lf the reception is not good, try to adjust
the antenna length otherwise, however the quality of the FM reception depends on the place
where you place the unit.
The proximity ot TV sets, uorescent lamps or other appliances may cause interference in the
reception ot radio programs, in this case removed the device.
(7), (9) you can control the playback of tracks on the device
(25) on the remote control for a few seconds, the "BT" on the
(24) or (29) for a few seconds to perform a manual search of
(24) or (29) for a shift step by step and make a ne manual tuning.
(24) or (29) select the desired memory number and press
EN
13