Usb Function; Aux-In Function; Clock Setting; Alarm Setting - Daewoo DRP-137 Manual De Instrucciones

Sistema hi-fi con radio fm, usb reproductor de mp3, aux in y conexión bluetooth
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USB FUNCTION

1. lnsert the USB memory to the USB socket (2).
2. First press the button FUNC (37) until you see the entry USB; wait a few seconds for the
player loads all MP3 les.
3. Playback will start automatically.
4. To enter a pause, press the button
5. To release the pause, press the button
6. To switch lo playback of the previous/next track press the
7. To fast forward in order of tens on the track number appears, press the M +/10+ (5) on the
unit. Each press will increase the number of ten numbers at time.
UNINTERRUPTED REPRODUCTION OF A SINGLE TRACK1 ALL SONGS
In playback mode (USB), press more times MODE (34) button on the remote control to
activate in sequence:
- Listening to a single track (the display shows the word 'REP 1").
- Continuous playback of all songs in memory (the display shows the word "REP ALL').
To cancel continuous playback repeatedly press the button MODE (34) until no lettering on
the display.
SHUFLLE PLAYBACK
The display shows the word "RAND").
To cancel the repeatedly function press the button MODE (34) until no lettering on the display.

AUX-IN FUNCTION

1. Connect via cable (no supplied) audio output of smartphones, tablets, multimedia players
to AUX IN (1) jack of the unit.
2. Press FUNC (37) button until you see the ''AU" on display.
3. Start playing the external source (see instruction manual).

CLOCK SETTING

To set the time, please, lo follow next steps:
1. Put the unit in standby mode.
2. Press and hold for a few seconds SET/MODE (10) button on the unit, indicating the hours
will start ashing.
3. Use
(7) or
(9) on the unit to set the time correctly.
4. Press SET/MODE (10) to con rm and go to the minute setting.
5. Use keys again (7) o (9) to set the correct minutes.
6. Press the SET/MODE (10) on the unit to con rm.

ALARM SETTING

The device is equipped with 2 alarms. To set the alarm 1, 2 or both, follow the steps below:
1. Put the unit in standby mode.
2. Press and hold the button for a few seconds ALARM1 (18) on the remote control. The
''Alarm1" and "OFF" will ash.
EN
(25) once.
(25) a second time.
14
(24) or .
Tabla de contenido
loading

Tabla de contenido