Idiomas disponibles
Idiomas disponibles
The robot vacuum
cleaner could not
connect to the Wi-Fi
network.
The robot vacuum
cleaner did not carry
out the scheduled
cleaning task.
The robot vacuum
cleaner does not return
to the charging base
after spot cleaning
or after changing the
starting position.
The robot vacuum
cleaner does not
resume cleaning.
The robot vacuum
cleaner is always
offline.
The connection
between the
smartphone and the
robot vacuum cleaner
failed.
Bad Wi-Fi signal. Check that the robot vacuum cleaner is
located in an area with good Wi-Fi signal.
The Wi-Fi connection is unstable. Reset the router, check if
there are any App updates, and try again. This robot vacuum
cleaner only supports the 2.4GHz band.
Make sure that your smartphone mobile data are disabled to
improve the linking process.
Check if the robot vacuum cleaner is in Sleep mode and change
mode. This option can be found on the general settings of the
robot vacuum cleaner and allows you to define time slots in
which the robot will not perform the scheduled cleaning tasks
when in Sleep mode.
Ensure proper connection of the robot vacuum cleaner to the
Wi-Fi: you will not be able to carry out scheduled cleaning
without connection and with a low battery.
The robot vacuum cleaner will map and calculate a new route
after running in Spot cleaning mode or after changing its
starting position.
If the charging base is very far away from the robot vacuum
cleaner, it will not be able to charge back automatically.
Manually move the robot vacuum cleaner to the charging base.
Make sure the robot vacuum cleaner is not in Sleep mode, as it
will not resume cleaning in this mode.
It will not resume cleaning when it is manually placed on the
charging base.
Make sure the robot vacuum cleaner is successfully connected
to a 2.4 GHz network and always in areas with good Wi-Fi
signal.
Make sure the robot vacuum cleaner and the charging base are
in an area with good Wi-Fi signal, reset the router, and retry
connection.
CONGA 7490 ULTIMATE GENESIS
ENGLISH
63
