Automatic Shut-Off; Cleaning And Maintenance; Troubleshooting Guide - Beurer HK 67 Instrucciones De Uso

Automatic shut-off

This heating belt is equipped with an automatic shut-off function that shuts the heating belt off after about
110 minutes. The Power Button of the heating belt and the white LED on the Power Bank will shut off.
Press the Power Button to switch the heating belt back on. If the heating belt does not switch on, the
Power Bank is depleted and must be recharged.

6. Cleaning and Maintenance

WARNING
• Prior to cleaning, always disconnect the Power Bank from the heating belt and remove it from the pouch.
• Always keep the Power Bank away from water or other liquids, as this may cause damage. To
clean the Power Bank, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning
agents.
NOTICE: To prevent product damage, do not dry clean, wring out, tumble dry, or iron the heating belt.
To machine wash, place it in a pillow case. Set the washing machine to the delicate or wool cycle
and the warm water setting. Always wash the heating belt together with other items. Use a mild
laundry detergent according to the manufacturer's instructions.
Frequent washing of the heating belt is not recommended and should only be machine washed
a maximum of 10 times during its life. Let the heating belt dry flat on a drying rack. To prevent
product damage, do not use pegs or similar items to attach the heating belt to the drying rack.
NOTICE: Reconnect the heating belt to the Power Bank only after the heating belt and the connector plug
are completely dry.
Storage
A storage bag is provided for taking the heating belt with you on journeys. Remove the Power Bank. Care-
fully roll up the heating belt and then also place the Power Bank in the storage bag. If you do not plan to
use the heating belt for a long period of time, store it in the original packaging in a cool, dry place. Always
remove the Power Bank before storing the device.
The Power Bank should be charged at least once per year to maintain its capacity.
NOTICE: Allow the heating belt to cool down before storing. To avoid making sharp bends in the heating
belt, do not place any objects on top of it while storing.

7. Troubleshooting Guide

Problem
The Power Button nor Power Bank
LED light up when:
- the Power Bank is connected to
the heating belt and
- the Power Button is pressed.
Cause
The Power Bank has been
depleted.
The Safety Shut-off Sensor was
triggered because of overheating.
6
Solution
Charge the Power Bank.
Allow the heating belt to cool
down to room temperature
and switch on again.