Cooper Lighting Solutions WaveLinx Pro WAC2-POE Instrucciones De Instalación página 7

Wireless Area Controller (WAC2-POE) with Outdoor Rated Enclosure
WaveLinx Pro design best practices
Design Consideration
WCL devices per WAC2
User-defined areas per WAC2
Construction areas per WAC2
Zones per Area
Total Zones per WAC2
Scenes per Area
WAC range (outdoor WCL devices)
WAC range (outdoor WCL devices)
Device hops beyond WAC (indoor / outdoor)
N ote:
Considering two (2) interior walls of standard construction
1
Considering no LOS obstructions (walls, columns, etc.)
2
Wireless Area Controller LED Indicators
The LED indicators can be used for diagnostics and troubleshooting diagnostics of the WaveLinx Pro system.
The table below gives you more information.
WAN Green
LAN Green
WiFi Blue
PAN Blue
802.15.4 Blue
www.cooperlighting.com
LED Color On
Connection to
OpenADR or 3rd
party
Connected to
building LAN and
received IP address
Connected to
building LAN and
received IP address
Future functionality
WaveLinx Pro
network is formed
Best Practice
150
49
1
3
200
16
150ft (45m) LOS
1
See sensor spec sheets
4 / 10
Off
Normal Communications
from 3rd party
No connection or Communications
IP address from from LAN.
building LAN
During internal
webpage setup
No connection or Communications
IP address from from LAN.
building LAN
During internal
webpage setup
Future functionality Future functionality
No WaveLinx Pro During Construction
devices are paired Grouping and
WaveLinx Pro
Communications
WaveLinx Pro
Maximum Capability
200
49
1
Up to 200 per WAC
200
16
300ft (91m) LOS
2
5 / 10
Blink Fast Blink
When login UN/PW
are reset
Future functionality
When WAC is set to
Factory Defaults
IB50301921 page 7
June 2022