Cooper Lighting Solutions WaveLinx Pro WAC2-POE Instrucciones De Instalación página 2

WaveLinx Pro
SAVE THESE INSTRUCTIONS
This installation instruction is for the Wireless Area Controller with Outdoor Enclosure (WAC2-POE-OUT-EN) which enables user control
of the WaveLinx Pro wireless controlled lighting (WCL) system and devices via local control or through the WaveLinx Mobile application.
The purpose of this document is to provide detailed instructions for installation and basic troubleshooting.
This document covers installation of the following product:
• WAC2-POE-OUT-EN
Wireless Area Controller with Outdoor Enclosure.
N ote: WAC2-POE-OUT-EN includes PoE injector internal to the enclosure and requires 120VAC 50/60Hz wiring via 3/4" conduit.
WaveLinx Pro connected lighting (WCL) system Architecture
Stand Alone WAC installation (outdoor specific)
120VAC 50/60Hz "AC" input
WaveLinx Pro
Wireless Area
Controller with
Outdoor Enclosure
(WAC2-POE-OUT-EN)
IB50301921 page 2
June 2022
Area or Room
(49 + 1 construction area)
120-347V 20A Room Based
Dimming Switchpacks Occupancy Sensor
WaveLinx Pro wireless controlled devices
(up to 200 devices per WAC2 - 150 devices best practice) - see Note
Wireless Area Controller (WAC2-POE) with Outdoor Rated Enclosure
WaveLinx Pro Mobile App
used for system setup
and personal control
KEY
Wi-Fi Signal
IEEE 802.15.4
Integrated
Outdoor
Note:
Performance based on second generation
WaveLinx Pro Wireless Area Controller (WAC2)
www.cooperlighting.com