Cooper Lighting Solutions WaveLinx Pro WAC2-POE Instrucciones De Instalación página 11

Wireless Area Controller (WAC2-POE) with Outdoor Rated Enclosure
• Relay with 0-10V
• Connected luminaires dim to 75%
• All wallstations in the default area control all luminaires together.
• All luminaires turn ON when the first occupancy sensor senses motion
• All luminaires turn OFF when the last occupancy sensor times out unoccupied
• Relay turns ON/OFF based on occupancy
• Receptacle
• The controlled outlet will turn ON/OFF based on occupancy
• Wallstation
• All wallstations in the default area will control all luminaires in the default area based on out-of-the-box scene
definitions.
Connecting the Wireless Area Controller to the Building LAN
1. Wired Connection - Building LAN connection
• Connect the WAC to the building network.
• Physical connection to the building LAN and receiving an IP address will automatically disable the wireless connection method
• WAC's will automatically receive a DHCP IP address when connected to the building LAN
• WAC device name will be: Cooper Lighting Solutions--xxxxxxxxxxxx on the building network
• (where **** are all twelve characters of the unit MAC address found on the label at the bottom front of the WAC plus 1)
• Using the WAC internal web page,
• Change the default name of the WAC
• Statically assigning the IP address of the WAC
2. Wireless Connection - Building Wireless connection
• WAC device name will be: Cooper Lighting Solutions--xxxxxxxxxxxx
• (where **** are all twelve characters of the unit MAC address found on the label at the bottom front of the WAC plus 1)
• Using the WAC internal web page,
• Enter the building wireless login credentials.
• Building wireless login credentials are secured in the WAC by secure web pages and encryption during storage.
• Change the default name of the WAC
• Statically assigning the IP address of the WAC
www.cooperlighting.com
WaveLinx Pro
IB50301921 page 11
June 2022