Idiomas disponibles
Idiomas disponibles
NOTE:
- When the wine cellar is connected, the cooling system starts working. When the system
reaches the selected temperature, the system stops cooling for optimum cooling.
EN
- When the temperature exceeds the selected one, the system starts cooling again.
- Once you select a temperature, the display returns to showing the current indoor
temperature, gradually changing until the desired one is reached.
5. Cleaning and maintenance
When cleaning the minibar, disconnect it from the mains, remove the food and remove the
trays and shelves.
Then use a damp cloth to clean the interior.
Do not use harsh chemicals.
We recommend that you do not overfill the minibar to ensure effective and even cooling.
Do not store toxic or explosive substances.
6. Security instructions
The wine cellar must only be connected to an electrical network of the same voltage as
shown on the data plate, located on the back of the minibar. Before connecting, make sure
that the power supply voltage is the same as that indicated on the data plate.
The minibar must be plugged into an individual electrical outlet to prevent overloads that
can cause fires.
If the plug cord is damaged, contact an electrician to replace it immediately. The minibar
must be properly grounded.
The manufacturer is not responsible for accidents caused by not following these safety
instructions.
7. Troubleshooting
The minibar doesn't work or doesn't get cold enough.
Make sure it is connected correctly. If the problem persists, check that a fuse has not blown.
The room temperature is higher than normal.
The door has been opened many times.
The door has not closed completely.
The temperature control is not set correctly.
The door gasket does not seal well.
abnormal voltage.
The appliance works continuously.
The room temperature is higher than the maximum supported.
There are too many bottles housed in the wine cellar.
The door is opening too many times.
Make sure the door is properly closed.
The control temperature is not calibrated correctly.
The light doesn't work.
Make sure it is connected correctly. If the problem persists, check that a fuse has not blown
and that it is connected correctly. If the problem persists, check that a fuse has not blown.
11
