Idiomas disponibles
Idiomas disponibles
3. Previous considerations
- Check that the minibar is not damaged, clean the interior with a dry cloth and plug it into
the mains. Position your minibar so that the plug is accessible. Do not place it directly on
EN
the ground, place it on a suitable support.
IMPORTANT: Before connecting the wine cellar to the current, place it in its working
position, vertically for 2 hours to ensure that the refrigeration system stabilizes.
- Do not introduce food until the minibar reaches the proper temperature after about 2-3
hours of operation.
- You can regulate the temperature of the minibar with the thermostat, located on the inside
of the appliance. Place it in the intermediate position to reach a suitable temperature for its
operation.
- Periodically clean the water tank located at the back of the minibar.
- The walls of the freezer compartment are covered with ice while the compressor is running.
The formed ice thaws when the compressor is not working and the water evaporates.
- The light inside the minibar turns on automatically when the door is opened.
The Baco wine cellar has an electronic temperature control on its front to program the device
with the configuration you want. The temperature range of this wine cellar is between 11
and 18ºC.
If the ambient temperature is higher or lower than the recommended temperature, it will
have a negative impact on its performance. For example, placing the wine cellar in a very
hot or very cold place can cause variations in its internal temperature.
The internal temperature may vary depending on the location of the bottles.
It is necessary to adjust the temperature of the wine cellar according to the ambient
temperature.
The Baco wine cellar is designed to accommodate a maximum of 8 bottles of wine (75 cl).
4. Operation
Turning on the wine cellar
Connect the cable to the current and adjust the temperature with buttons 4 and 5.
Change from Fahrenheit to Celsius
Press button 2 to change the temperature unit.
Light on and off
Press button 1 to turn the interior light on and off.
When you use the wine cellar for the first time or restart it after being turned off for a long
time, there may be a slight difference between the degrees you select and those displayed
on the screen. This is due to the activation time. Once the wine cellar runs for several hours,
this temperature will be perfectly matched.
10
1. Light control button.
2. Fahrenheit ºF / Celsius ºC selector
3. Screen
4. Button to increase temperature.
5. Button to decrease temperature.
