Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION INSTRUCTIONS
2. Insert the hook of the mounting bracket (C) into the slot
on the housing (A).
3. Push the mounting bracket (C) up toward the housing (A)
and align the two small hooks on the mounting bracket
(C) into the slot on the housing (A).
4. Rotate the mounting bracket lock (J) clockwise to lock
the mounting bracket (C) in place. Securely tighten the
motor screws (CC), then remove the two mounting
bracket nuts (EE) and washers (FF).
Hardware Used
(8
Motor Screw
x2
0
Mounting Bracket Nut
x2
G
Washer
x2
17
0
~
UTILITECH'
]
L owes.com
l!l)
- · - :
