8. Before using, check the cigarette lighter socket to make sure that there is no
rust or residue inside. The cigarette lighter socket with poor electric conduction
may cause overheating of the product or power source, which will damage the
product.
9. Do not place the product in a high-humidity environment to avoid serious
damage.
10. Do not throw this product into fire to avoid explosion, battery leakage or other
dangers.
11.Do not disassemble or break the product randomly to avoid damage.
12.Keep this product away from strong sunlight.
13. Do not use or store this product in an environment where the temperature is too
low or too high.
14.Keep this product away from flammable/explosive liquids, gases or explosives.
15. Before charging this product, make sure that the specifications of the adapter
match the product.
16.If it's not in use, put it in a dry and ventilated place.
17.Do not let it collide with metal objects to avoid short circuit.
18. Pay attention to heat dissipation and ventilation during use to avoid danger of
excessive temperature.
19.If there is swelling or leakage about the product, immediately stop using it.
20.Do not cover or obstruct the product with paper or other objects.
21.Unplug the power cord if it's not in use.
22. If leakage occurs and the liquid splashes into your eyes, immediately rinse your
eyes with clean water. If the symptom is serious, please go to hospital.
23.Power the product with a cigarette lighter plug less than 15A.
24. As this product has a lithium battery, it can work via the battery, or the plug of the
product can be inserted into the cigarette lighter socket on the car for use.
25.The applied power source must be the 12V DC power source.
26. Do not block the inflation inlet and deflation outlet. Make sure that the inflation
3
inlet and deflation outlet remain smooth at all times.
27. Observe the local waste treatment provisions and never throw the air pump away
randomly.
28. Do not use this product when the hose is damaged and please change the hose
immediately.
29.Do not pull out the hose when inflating, because high pressure will cause danger.
30. Do not make the air pump work for more than 20 minutes, because motor's
overheating may cause internal damage. The air pump shall be fully cooled for 30
minutes after continuously working up to 20 minutes.
31. Do not use this air pump if any part is damaged and please contact with the
professional personnel to repair it.
32.Do not expose this product to the rain or immerse it in water.
33.To prevent risks, the inflation inlet shall not be forward to the face or body.
34.Do not leave while inflating.
How to Charge
1. Charging Via USB Charging Output Port
In the stand-by or power-on state, connect one end of the data cable to the mobile
phone, and the other end to the USB 1A or 2A output port of this product to charge
the digital product, as shown in Figure 1.
2.Charging Via Cigarette Lighter Plug/Adapter
In the stand-by or power-on state, take out the cigarette lighter plug and insert it
（Figure 1）
4
