Haier BDU460 Manual Del Usuario página 7

Cengemader vertical
Idiomas disponibles

Idiomas disponibles

BDUmanual
10/22/01
11:24
AM
Page
7
Moving
the
freezer
When
transporting
the freezer
it
must be kept
in the upright
position.
If the freezer
is inadvertently
tilted
beyond
45 degrees
or was
in a lay
down
position
for any
reason
e.g.
shipping,
the unit must not be
operated
for at least 24 hours, It
must be placed in the upright posi-
tion for this period to allow the inter-
nal oil and refrigerant
Io stabilize in
the system. Ignoring this precaution-
ary measure may result in damage
to the sealed system and compressor.
Defrost
whenever
frost
on the wall
cf
the freezer
compartment
becomes
1/8"
thick.
Never
use a sharp
or
metallic
instrument
to remove
frost
as
it may
damage
the cooling
coils
which
is a part of the shelving.
(/%
punctured
cooling
coil will cause
serious
damage
to the product
and
will void
the warranty).
We
do not
recommend
using
any kind
of
scraper.
Do not use any electrical
device
in defrosting
your
freezer.
Turn the temperature
control
ro "0"
and unplug
the freezer.
Remove
all
foods
from
the freezer
compartment.
Slide
a shallow
pan under
the
freezer
using
the opening
between
the bottom
legs. Insert
the drain
hose
into the pan.
Remove
drain
plug
and
allow
defrost
water
to drain
into
pan.
Defrosting usually takes a few hours.
To quicken defrosting
you may, keep
the door open and place a bowl of
warm water in the freezer. After
defrosting,
empty water from the
drip tray.
Sponge remaining
water from the
bottom before cleaning. After
defrosting,
clean the inside of the
freezer (see care and cleaning).
After cleaning
be sure to replace the
drain plug and remove the drip pan
carefully,
plug in the freezer and
return the temFerature
ro its previous
position.
Now return food to freezer.
loading