EN - USER MANUAL
1. Hooks from the front panel
2. Reset button
3. Home button
4. Screenshot button
5. Turbo button
6. Led
FIRST START
The controller starts up by pressing and holding the
pairing mode:
• Slow blinking green/purple light - Connecting to the last connected device (Color depends of last paired device),
• Fast blinking green light – Pairing in PC mode,
• Fast blinking purple light - Pairing in Switch mode.
Below are step-by-step instructions on how to connect to specific platforms.
After the device is connected for the first time, a single press of the
communication with the last paired device.
By default gamepad is paired with adapter included in set, after adapter is plugged into PC it should be ready to working (If that
don't work please follow below steps).
INSTALLATION
• PC:
Ů Connect the wireless adapter to the PC USB port, and press the button on the side of the adapter. Light on adapter will start
blinking fast.
Ů Turn on the controller in PC mode according to the instructions above.
Ů The controller will be automatically connected to the adapter and is ready for use.
• Switch®:
Ů Turn on the console and then go to Settings.
Ů Find the "Controllers and Sensors" tab and press "Change Controller Grip/Order".
Ů Turn on the controller in Switch mode as described above.
Ů The controller will be automatically connected to the console and is ready to use.
• Android® / iOS® / PC (with Bluetooth®):
Ů Turn on Bluetooth® on your device and start searching for devices.
Ů Turn on the controller in PC mode according to the instructions above.
Ů On the smartphone screen, search for „Wireless Controller" and connect the devices.
• Controller can work in wired mode if connected to a PC, console or smartphone using a USB cable.
LED MARKINGS
• Green light - X-input mode (PC / Android / iOS)
• Purple Light – Switch Mode (Nintendo® Switch®)
• Blue Light - D-Input Mode (PC)
• Orange breathing light - Charging
• Fast blinking red light - low battery (below 10%)
ADDITIONAL FEATURES
• Enabling the D-input mode (PC) – When the controller is connected to the PC, press the
time and hold them for about 3 seconds until the LED turns blue. The return back to the PC mode is carried out in a manner
analogous to the above.
• Replacing the front panel - To remove the current panel, pry it up on both sides
new panel should be installed in place of the previous one and pressed on the entire surface until a click is heard.
• Vibration strength adjustment - You can adjust the vibration strength by pressing the
up (Increase strength) or down (Decrease strength). 4 modes are available: 100% - 70% - 30% - 0%.
• Joystick Sensitivity Adjustment - You can adjust the joystick sensitivity by pressing the
whose sensitivity you want to change. There are three sensitivity settings: 100% -> 70% -> 30%.
• Illumination adjustment - The controller offers 3 backlight modes selected by pressing the
simultaneously for about 2 seconds. The available modes are:
Ů Front and button backlight,
Ů Front light only, buttons not illuminated,
Ů Backlight off.
4
|
button. The LED on the front of the device will inform about the specific
button will wake up the controller and start establishing
and
buttons at the same
using your fingernail or a thin object. The
button and moving the left joystick
button and pressing the joystick
and
• Turbo Mode - The controller allows you to set the Turbo (multiple clicks) function in two modes:
Ů On activation,
Ů Continuous.
Simultaneous clicking on
trigger a series of quick clicks. Clicking
button clicks continuously except when it is pressed. Another click on the
for that button.
You can clear all turbo settings by clicking
CHARGING AND BATTERY DETAILS
• It takes 3-5 hours to fully charge the controller, depending on the charger used (We recommend using the cable included in
the set).
• The device's battery lasts for about 10-15 hours of gameplay on a single charge.
• The device can be charged while in use, in which case the LED will start to glow with a breathing light according to the current
mode.
• If there is no activity within 5 minutes, the device turns off. The device can be turned on again by pressing the Home button.
In case of any unexpected behaviour, you can reset gamepad to it's factory setting after pressing button
the gamepad.
FR - MANUEL DE L'UTILISATEUR
1. Crochets du panneau avant
2. Touche Reset
3. Touche Home
4. Touche Screenshot
5. Touche Turbo
6. Led
PREMIER DÉMARRAGE
Le contrôleur démarre en appuyant sur le bouton
indique le mode d'appairage spécifique :
• Voyant vert/violet clignotant lentement - Connexion au dernier appareil connecté (la couleur dépend du dernier appareil
apparié).
• Clignotement rapide de la lumière verte - Appairage en mode PC.
• Lumière violette clignotant rapidement - Appairage en mode Switch.
Vous trouverez ci-dessous des instructions étape par étape sur la manière de se connecter à des plates-formes spécifiques.
Une fois l'appareil connecté pour la première fois, une simple pression sur le bouton
à établir la communication avec le dernier appareil apparié.
Par défaut, la manette de jeu est couplée à l'adaptateur inclus dans le kit. Une fois l'adaptateur branché sur le PC, la manette
devrait être prête à fonctionner (si ce n'est pas le cas, veuillez suivre les étapes ci-dessous).
INSTALLATION
• PC:
Ů Activez le Bluetooth® sur votre appareil et commencez à rechercher des appareils.
Ů Allumez le contrôleur en mode PC conformément aux instructions ci-dessus.
Ů Le contrôleur sera automatiquement connecté à l'adaptateur et sera prêt à l'emploi.
• Switch®:
Ů Allumez la console et allez dans Paramètres.
Ů Trouvez l'onglet „Contrôleurs et capteurs" et appuyez sur „Changer la poignée/ordre du contrôleur".
Ů Allumez le contrôleur en mode Switch comme décrit ci-dessus.
Ů La manette sera automatiquement connectée à la console et sera prête à être utilisée.
• Android® / iOS® / PC (avec Bluetooth®):
Ů Activez le Bluetooth® sur votre smartphone et commencez à rechercher des appareils.
Ů Allumez la manette en mode PC en suivant les instructions ci-dessus.
Ů Sur l'écran du smartphone, recherchez „Wireless Controller" et connectez les appareils.
buttons
• La manette peut fonctionner en mode filaire si elle est connectée à un PC, une console ou un smartphone à l'aide d'un
câble USB.
MARQUAGE PAR LED
• Lumière verte - Mode entrée X (PC / Android / iOS),
• Lumière violette - Mode Switch (Nintendo® Switch®),
• Lumière bleue - Mode entrée D (PC),
and any button changes its operating mode to "on activation". Subsequent use of this button will
and the same button again will enable continuous mode. From then on, the selected
and a single button will disable the turbo mode
and
simultaneously.
et en le maintenant enfoncé. Le voyant situé sur la face avant de l'appareil
on back of
réveillera la manette et commencera
|
5
