AYR 758 Manual Del Usuario página 27

5.4 Vibrating alarm function
1- The alarm function is turned off by factory default. To activate it
press the ON button
on.
2- The buzzer beeps 3 times and the icon appears.
in the bottom right-hand corner.
3- To switch it off, press the ON button again.
the display is on. A sound is emitted and the icon
dicating that the alarm is turned off.
4- With the alarm function activated, if a strong vibration is detected
on the door, after 10 seconds, the display will light up, take a picture
and a red alarm icon will light up at the bottom right of the display whi-
le emitting an alarm sound.
5- If not deactivated after 10 seconds, the alarm stops and the peepho-
le will continue to monitor the vibrating alarm status.
6- When the alarm is triggered, you can cancel it at any time by pres-
sing the ON button.
27
for 3 seconds when the display is switched
.
alarm button
for 3 seconds when
disappears, in-
EN