Idiomas disponibles
Idiomas disponibles
• It is not permitted machining of materials with dimensions outside the limits specified in this
manual.
• It is not permitted the use of untested tools that are not relevant EN standards for labor safety
and that are not intended for the drill diameter.
• Any changes in the design of the machine is not permitted.
12.3
General Safety
Warning labels and / or stickers on the machine that are illegible or removed shall be
replaced immediately!
To avoid malfunctions, damage and physical injury MUST be observed:
Work area and keep soil around the machine clean and free of oil, grease and
residues of material!
Provide adequate lighting in the work area of the machine!
The machine does not use outdoors!
In fatigue, lack of concentration or under the influence of drugs, alcohol or drugs,
the work on the machine is prohibited!
Wood dust may contain chemical substances that have a negative impact on
personal health. Work on the machine only in well-ventilated areas with appropriate
dust mask to perform!
The running machine should never be left unattended! Turn off the machine before
leaving the work area and wait until the machine is at a standstill!
Before maintenance or adjustments, the machine must be disconnected from the
power supply! Switch off the main switch before disconnecting the power (OFF).
Use the power cord never for transport or manipulation of the machine!
On the device there are only few of them serviceable components. It is not necessary to
dismantle the machine.
Have repairs carried out only by an expert!
Accessories: Only use of HOLZMANN Accessories!
If you have any questions and problems to our customer service.
A first aid kit in accordance with DIN 13164 should always be readily
available for a possible accident. Initiate the violation in accordance with
the necessary first aid measures. When requesting support, provide the
following details:
1. Place of accident
3. Number of injured people
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
MULTI-DÜBELBOHRMASCHINE / SINGLE-RAW MULTI-BORING MACHINE / TALADRO MULTIPLE DBM 21N
NOTICE
Emergency procedure
2. Type of accident
4. Injury type(s)
SAFETY
Seite 28
