Sunrise Medical JAY ZIP BACK Manual Del Usuario página 10

ENGLISH
BACK TRANSIT SAFETY
This back has been dynamically tested for use on a
wheelchair transported in a motor vehicle.
Please follow all installation, use and maintenance
instructions within this manual as well as the transit
instructions listed below.
WARNINGS
• If possible and feasible, the rider should transfer to the
Original Equipment Manufacturer vehicle seat and use
the vehicle restraints.
• The distance between the top of the user's shoulder and
the top of the back shell should not exceed 3" (7.6 cm).
• The wheelchair must be labelled as appropriate for use
as a seat in a motor vehicle, dynamically tested to the
performance requirements of ISO Standard 7176-19
and installed, used and maintained according to the
manufacturer's instructions.
• If the original wheelchair seat was replaced, the new seat
must be approved for wheelchair transit, installed and
used as indicated in the manufacturer's instructions.
ENGLISH
REMOVAL AND REPLACEMENT
Removal
Following installation and adjustment, the back can be
easily removed from the wheelchair if necessary.
To remove, pull down on back handle, rotate up, then
remove from the hardware receivers.
Proper reattachment after removal
To reattach the back to the hardware receivers, pull down
on cord, insert back into receivers, and rotate down.
ENGLISH
24 MONTH LIMITED WARRANTY
Each JAY ZIP Back is carefully inspected and tested to
provide peak performance.
Every JAY ZIP Back is guaranteed to be free from
defects in materials and workmanship for a period of 24
months from the date of purchase, provided normal use.
Should a defect in materials or workmanship occur within 24
months from the original date of purchase, Sunrise Medical
will, at its option, repair or replace it without charge.
This warranty does not apply to punctures,
tears or burns, nor to the back's removable cover.
Claims and repairs should be processed through the nearest
authorized supplier.
JAY Zip Back 122962
• The Wheelchair Tie down and Occupant Restraint System
(WTORS) should be compatible with the specific wheelchair,
used as indicated in the manufacturer's instructions and
should comply with the performance requirements of ISO
Standard 10542.
• The wheelchair must be forward facing during transport.
• In order to reduce the potential of injury to vehicle occupants
wheelchair-mounted accessories such as trays and non
essential equipment should be removed and secured
separately.
• This product is intended for use by users ranging in weight
from 10 to 75kg.
• Postural support devices such as pelvic positioning belts,
anterior trunk supports or postural supports such as lateral
trunk supports should not be relied on for occupant restraint
in a moving vehicle unless they are labelled as conforming to
ISO Standard 16840-4.
• Alterations or substitutions should not be made to the
structure, parts or components, without consulting the
manufacturer.
• FAILURE TO HEED THESE WARNINGS COULD CAUSE
SEVERE INJURY TO THE WHEELCHAIR RIDER OR
OTHERS.
REMOVAL AND REPLACEMENT
WARNING
If you are uncertain if you have heard the locking "click",
pull up on the back to ensure that it has been
securely locked.
Except for express warranties made herein, all
other warranties, including implied warranties of
merchantability and warranties of fitness for a particular
purpose are excluded.
There are not warranties which extend beyond the
description on the face hereof.
Remedies for breach of express warranties herein
are limited to repair or replacement of the goods.
In no event shall damages for breach of any warranty
include any consequential damages or exceed the cost of
non-conforming goods sold.
10
TRANSIT SAFETY
WARRANTY
REV.H