Hopper, Filter And Suction Pipe Cleaning, Gasket Check And Suction Fan Bearing Lubrication - Nilfisk-Advance RS 500 Instrucciones De Uso

INSTRUCTIONS FOR USE
Maintenance
Engine fuel filter replacement
Nut and screw tightening and
leakage check
Lubrication
Engine coolant line sleeve check
Drive system pump oil filter
replacement
Hydraulic system oil drain filter and
tank breather filter replacement
Hydraulic system oil suction filter
replacement
Alternator belt replacement
Cab air filter replacement
Injector calibration and cleaning
Climate control system belt
replacement
Engine coolant replacement
Hydraulic system oil change
Brake system check
Hydraulic pump pressure check
Minor engine overhaul
Major engine overhaul
(1): or every 6 months
(2): maintenance to be performed by Lombardini authorized Service Center
(3): or every two years
(4): after 5,000 hours
(5): after 10,000 hours
(6): for the procedure see the Service Manual, at any Nilfisk-Advance Service Center.
(7): every year, if the machine is not frequently used.
(8): if a lower-quality oil is used, change it every 125 hours.
HOPPER, FILTER AND SUCTION PIPE CLEANING, GASKET CHECK AND SUCTION FAN
BEARING LUBRICATION
WARNING!
Protect body parts (eyes, hair, hands, etc.) properly, when performing cleaning operations using
compressed air or water gun.
Preliminary operations
1. Empty the hopper (12, Fig. G), drive the machine to a cleaning/washing appointed area, then engage the parking brake
(7, Fig. E).
2. Lift and dump the hopper (12, Fig. G), according to the procedure shown in the relevant paragraphs.
3. Install the hopper door support rod (8, Fig. F).
Hopper cleaning (after every use)
4. Clean the hopper (2, Fig. O) with pressurized water (1).
5. Carefully check the suction sealing gasket (3) for integrity, and replace it if necessary.
20
Running-in
Every 10
period (after
hours or
the first 50
before use
hours)
(6)
(6)
(6)
(6)
Every 200 Every 600 Every 1,200
hours hours
(7)
(6)
(6)
(7)(6)
(6)
(6)
(6)
(3)(6)
(1)
Every 2,400
hours hours
(2)(3)(6)
(6)
(3)(6)
(3)(6)
(6)
(6)
33015122(1)2006-02
Long
periods
(2)(4)(6)
(2)(5)(6)