Idiomas disponibles
Idiomas disponibles
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning
efficiency
high and to prevent
damage
to your vacuum
cleaner, the agitator
must be cleaned
every
time the belt is changed.
The agitator
must also be cleaned
accord-
ing to the following
schedule:
Vacuum leaner
se
_itator
HEAVY -
every week
(used daily)
MODERATE -
every month
(used 2-3 times/week)
LIGHT -
every 2 months
(used 1 time/week)
iMPORTANT
Turn off and unplug vacuum cleaner from
electrical outlet. Check and remove hair,
stringand lint build-up frequently in the
PowerMate agitator and end cap areas.
Remove any dirt or debris
in the belt path
area or in the brush roller
area.
Carefully remove any string or debris lo-
cated on the agitator or end caps.
AGITATOR
ASSEMBLY
IEnd
CaP
Beff
Pafh_
LIGHT BULB CHANGING
WARNING
Electrical Shock Or Personal injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner. Faiiure to do so could
result in electrical shock or personal
injury from the vacuum cleaner
suddenly starting.
i ,cAuT,o.
_Do not plug in or turn on until the vacuum
cleaner
is completely
reassembled.
1. Remove PowerMate
cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
(pages 21-22).
|
_Pull
out to
_ '2. Remove the light
left side
L
bulb by pulling
_
straight
out.
_
CAUTION
Do not use a bulb rated over 9W (13V).
During
extended use, heat from the bulb
Push in
to right
3. To replace
the
light bulb,
carefully
insert
fully
into slot.
4. Reinstall PowerMate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING (page 21-22).
NOTE: See PARTS AND FEATURES (page 5)
for Bulb number.
- 22 -
