Idiomas disponibles
Idiomas disponibles
3. Lower handle
from upright
position
by
pressing
on the handle release pedal.
Handle
4. Select a pile height
setting
by pressing
the small pedal on the rear of the
PowerMate.
The pile height setting shows
on the indicator.
SUGGESTED PiLE HEIGHT
SETTINGS:
For best deep down cleaning,
use the XLO
setting.
However, you may need to raise the
height to make some jobs easier, such as
scatter
rugs and some deep pile carpets,
and to prevent the vacuum
cleaner
from
shutting
off. Suggested
settings are:
HI - Shag, deep pile, or scatter rags.
MED - Medium to deep pile.
LO - Low to medium
pile.
XLO - Mast carpets
and bare floors.
Attention:
Refer to your carpet
manufacturers
cleaning recommendations.
Some more delicate
carpets
may require
that they be vacuumed
with the PowerMate
agitator turned off to prevent carpet
damage.
_CAUTION
DO NOT leave the PowerMate
running
in one spot in the upright position for
any length of time.
Damage
to carpet
may occur.
5. Select
a switch
position on the handle.
OFF - turns off
both the canister
and the
PowerMate
motors.
FLOOR - turns on
the canister
motor
only.
CARPET - turns on
both the canister
and the
PowerMate
motors.
NOTE - When
this
switch
is in the
FLOOR position,
the headlight
DOES NOT
function
since no
electricity
flows to
the PowerMate.
OFF
FLOOR
-.CARPET
TELESCOPING WAND
The telescoping wand length is adjustable
and requires no assembly. To adjust,
simply push down on the wand adjust
button and slide the upper portion of the
telescoping wand to the desired height.
NOTE:
When
adjusting
the telescoping
wand length
you may have to hold the
PowerMate
with your hand
or foot.
m
m
m
-- Keep Hand
AboveThis
Tab
m
m
-11 -
