Idiomas disponibles
Idiomas disponibles
PRIMARY FILTER CLEANING
The
primary
filter
is
located
inside the dust
cup lid.
It is recommended
to clean the primary
filter with cold water at least every (])
month. Check the primary filter
frequently and clean when dirty.
NOTE:
When
the cleaning
of the filter
no
longer
restores
vacuum
cleaner suction
to
full power_ replace
the filter.
1. Remove the dust cup as outlined in the
DUST CUP CLEANING (page 17).
2. Pull the dust cup lid latch and open the
lid.
Lid
Latch
3. Remove the primary
filter.
Primary
Filter
4. Wash
with cold water
only, DO NOT
use detergent
or soap.
squeeze
by hand
and allow to air dry. Allow
parts to dry
24 hours before putting back into vacuum
cleaner.
DO NOT operate
without
primary
filter
installed.
DO NOT wash
in the
dishwasher.
DO NOT install
primary
filter
if damp.
To Relnstalh
1. Place the primary
filter
into the dust
cup lid.
Primary
Filter
2. Close the dust cup lid. Be sure the
lid snaps in place.
A noticeable
"click"
should
be heard.
Latch
3. Reinstall the dust cup. See DUST CUP
CLEANING (page 17).
= 19 =
