Kenmore 116.22614 Manual De Uso Y Cuidado página 14

Idiomas disponibles

Idiomas disponibles

ATTACHMENT
USE TABLE
CLEANING
AREA
Between
Bare
Carpeted
ATTACHMENT
Fu,nlturo ]
Cushions]
Drapes 1
Stairs
FI . ...
Floors/Rugs
Wails
Crevice fool
_
_
_
brush
_
_
_
_
Dusting
PowerMate
Pet PowerMate
3
_
_
1. Always
clean attachments
before using on fabrics.
2. 3-way
switch should be in FLOOR position.
3. Pet PowerMate
attachment
instructions are included with the product.
PERFORMANCE
FEATURES
WARNING
Personal injury Hazard
Always turn off and unplug
the vacuum
cleaner
before cleaning
the agitator area
as agitator may suddenly
restart.
Failure
to do so can result in personal injury.
THERMAL PROTECTOR
This vacuum cleaner
has a thermal
protector which automatically
trips to
protect the vacuum
cleaner
from
overheating.
If a clog
prevents the normal
flow of air to the motor, the thermal
protector
turns the motor
off
automatically.
This allows the motor to
cool in order to prevent
possible damage
to the vacuum
cleaner.
To correct
problem:
Turn the vacuum
cleaner
off and unplug the power
cord
from the outlet
to allow
the vacuum
cleaner
to cool and the thermal
protector
to reset.
Check for and remove
clogs,
if
necessary.
Also check
and replace
any
clogged
filters. Wait approximately
fifty
(50) minutes and plug the vacuum
cleaner
in and turn back on to see if the
motor protector has reset.
MOTOR PROTECTOR
This vacuum cleaner
also has a motor
protector by-pass
valve which prevents
motor overheating
and damage.
The
valve opens to
provide cooling
air
when a clog prevents
normal
air flow to the
Motor
Protector
Dust
Cup
vacuum
cleaner suction motor. You will
notice a change
of sound as air rushes
through the valve opening.
To correct
problem: Empty the dust cup and
clean the primary filter and pre-filter.
Check
for and remove clogs, and empty
dust cup if
necessary.
See CLOG REMOVAL (page 16).
NOTE: Do not block motor protector.
NOTE: The motor protector
may open when
using attachments
or when cleaning
new
carpet due to reduced airflow
caused
by
the attachments
themselves
or by new
carpet.
= 14=
loading