Idiomas disponibles
Idiomas disponibles
Installation
Step 3:
•
Placing the pump in a basin and connecting the check valve: connect the discharge
pipe (1) to the elbow (2), union(3), check valve(4), and gate valve(5).
NOTICE
NOTICE
8
3
2
1
Position pump so the switch is away from the inlet, so switch is clear from
incoming water. Verify the switch has at least 1 in. clearance to the side
wall of the basin and is free to move throughout its movement. If optional
control device or float is used, follow mounting instruction supplied with
device or float.
Install a gate valve or ball valve if required by local, regional or state code.
5
4
