GYS TCB 90 Traducción De Las Instrucciones Originales página 11

Translation of the original instructions
Connection / disconnection:
• Disconnect the power supply before
connecting/disconnecting the device to/
from the battery.
• The terminal of the battery that is not
connected to the car frame must be
connected first. The other connection
must be made on the car frame, far from
the battery and the fuel line. The battery
charger must be connected to the power
supply network.
• After the charging process, disconnect the
battery charger from the power supply
network and remove the connector from
the car frame and then the connector from
the battery, in this order.
Connection:
• Class II device.
• This machine is fuse-protected.
Maintenance:
• If the power supply cable is damaged,
it must only be replaced by a cable
specified or supplied by the manufacturer
or its after-sales service.
• Service should be performed by a
qualified person.
• Warning! Always remove the power plug
from the wall socket before carrying out
any work on the device.
• If the internal fuse is blown, it must be
replaced by the manufacturer, its after-
sales service or an equally qualified
person.
TCB 60 / 90 / 120
EN
11