The two tongues are held together magnetically, and
can be easily separated by pulling them apart.
Securing the sunshade
The TAKATA MINI is supplied with a sunshade that
you can attach to the seat and extend or retract as
necessary.
Step 1 – Attaching the sunshade
[MINI_025] Attach the four push buttons on the side
of the sunshade to the four buttons on the side of the
TAKATA MINI cover (two on each side).
Pull the rear of the sunshade (with three push buttons)
over the upper end of the TAKATA MINI, and affi x it
via the three buttons on the cover. The sunshade is
now attached in its extended position.
Step 2 – Adjusting the sun shade
To retract the sunshade, or extend it again, you have to
44
open the two small push buttons on the side (used to
secure the shade in an extended position). You can
then slide the front of the sunshade in, or when in a
retracted position, pull it back out again. The two
larger buttons on the side act as a pivots for the shade.
Removing the sunshade
The sunshade is secured to the TAKATA MINI via
push buttons. To remove it, you must open all of the
push buttons that connect the sunshade to the cover.
You can then lift off the shade.
4. SECURING YOUR CHILD
NOTE!
For safety reasons, children should always get in and
out from the passenger side of the vehicle, or directly
onto a sidewalk.